top of page

Installation of lamps


Order installation for the ceiling or wall lamp of your dreams for a fixed price

The service is suitable both for replacing an old lamp and for installing a new lamp - indoors and outdoors.

The surface-mounted light must be able to be installed on top of the distribution box, on the ceiling/wall surface with a piece of sugar or a plug.

With the installation done by reliable professionals, you ensure that the work is done in the agreed time and in accordance with good construction practice. At the same time, you ensure that the product functions and that the manufacturer's warranty conditions are met.


The installation service is available in the Kauniainen areas of Helsinki, Vantaa, Espoo.


The lamp is installed according to the product manufacturer's instructions.

The lamp must be able to be installed by one installer, at a maximum height of 3 meters, and the time required to assemble it is a maximum of 15 minutes.

If assembly takes more than 15 minutes, additional work of half an hour will be charged €29

Please note that suitable bulbs are not necessarily supplied with the lamp. Get the bulbs you like before installation, the installer will not bring them with him.

  • Removing the old lamp*

  • Assembling a new lamp that is delivered in parts

  • Attaching the lamp to the ceiling/wall surface or junction box according to the manufacturer's instructions.

  • Connecting the electricity to the lamp

  • Installation of bulbs supplied by the customer

  • Necessary electrical safety measurements

  • Testing the operation of the lamp

  • Cleaning the installation site and removing packaging waste

* We are not responsible if, when removing the old lamp, any part of it breaks down due to its age.


It is the responsibility of the person ordering the installation to ensure that the product is suitable for installation at the site and can be installed. We ensure that the lamp can be installed in accordance with the basic content of the installation service.

It is the customer's responsibility to check that the received product is correct and has no transport damage.

If the installer determines at the site that the product is not suitable for installation at the site or cannot be installed in accordance with the delivery content of the installation service, the customer will be charged for the entire lost working time of the installer and mileage compensation (see the costs in the appendix "Additional installation work").

An obstacle to installation can be, for example, that the installation point is at a height of more than 3 meters, the lamp cannot be installed because there is too much furniture in the way, or that the product cannot be attached to an existing wall or ceiling structure.

Make an appointment

bottom of page